Sunday, 14 July 2013
Running Blinky
Hardware Setup
step 2
Make sure your laptop and your board are connected as shown
below.
This powers the board and provides output from UART1 to the PC
ads: ebay
Saturday, 13 July 2013
Running the pre-programmed Blinky example
The MCB2300 board from Keil comes with a pre-installed
example (“Blinky”)
When the board is powered up, the LPC2370 will read the
Analog
input and show the value as a bar graph on the
LCD display as well as the LEDs
The source to the Blinky example can be found here (in
MDK V3.11):
C:\Keil\ARM\Boards\Keil\MCB2300\Blinky
Note:
The source code to a number of other examples for this board can be found
here: C:\Keil\ARM\Boards\Keil\MCB2300
ads: ebay
Monday, 8 July 2013
FIRST INDIAN RAILWAY
the first indain rail service was started between MUMBAI and THANE in 1842..!!
ads: ebay
ads: ebay
Subscribe to:
Posts (Atom)